Page 159 - Bürkert

5/2-way Flipper Solenoid Valve for pneumatics

6525

• Modular valve block with 10 mm
mounting pitch

• Low power consumption
• Fast response times
• With manual override
4(B) 2(A)
14
12
5(S) 3(R)
1(P)

A compact manifold with a pitch of 11 mm per station can be put to- Envelope Dimensions [mm] (see datasheet for details)
9.3 9.3 9.3
gether from the components of Type 6525. Type 6525 consist of a pilot 24.5 5.08 24.5 10 18 24.5 10 10
5.08
5.08
18
flipper valve, Type 6144 and a pneumatic seat valve. The flipper principle 0.6 18
0.6
0.6
allows switching of high pressures together with low power consumption 6.5
6.5
6.5
and fast response times. All valves are equipped with manual override as
a standard.
Technical Data
Orifice DN4.0 mm 3 85.9 Ø2.1 3 Ø2.1 3 Ø2.1 90.2 90.2
Body material PPS, PA 85.9 85.9 90.2
Seal material FKM, NBR and PUR 0.7 3.7 0.7 0.7 Ø4.2 Ø2.2 8.4 Ø4.2 Ø2.2 C 8.4 Ø4.2 Ø2.2 8.4
3.7
22
Media Lubricated, oil free, dry compressed air; neutral gases 18.4 3.7 22 18.4
18.4
3.7
(5 µm filter recommended) 6.8 3.7 12.5 6.8 3.7 12.5 6.8 12.5 57.25 22 57.25 4.4 4.4 57.25 12.4 4.4 12.4
Media temperature -10 °C to +50 °C 4 5.6 4 5.6 4 5.6 12.4
3.7
Ambient temperature -10 °C to +55 °C 3.7 11.3 3.7 11.3 17 11.3 17
Manual override Standard 3.7 3.7 17 23.2 3.7 23.2 23.2 23.2 23.2 23.2
Port connection Flange for MP11
Pneumatic module Type MP11 with M5, M7, push-in connection Ø 6 mm 0.7 16.5 10.7 16.5 10.7 10.7
0.7
0.7
2.1
Voltage tolerance ±10% 2.1 2.1 16.5 A B C
3 3 20 3 20 20
Cycling rate approx. 1000 c.p.m. 20 10.7 90.2
Voltage 24 V DC * A
Nominal power 0.8 W B
Duty cycle Continuous operation (100% ED)
Electrical connection Rectangular plug with Raster 5.08 mm 9.3 9.3 9.3 24.5 24.5 24.5
on valve (not included) 5.1 5.1 5.1 18 18 18 10 10 10
Type of protection IP40 with rectangular plug 0.6 0.6 0.6
Protection class 3 acc. to VDE 0580 6.5 6.5 6.5
Weight 21 g
Mounting with 2 screws M2x20
Installation As required, preferably with actuator upright
Response times [ms] Measurement acc. to ISO 12238
Opening <10 ms
Closing <10 ms 3 Ø2.1 3 Ø2.1 3 Ø2.1
85.9 85.9 85.9 90.2 90.2 90.2
* 10% residual ripple allowed
0.7 0.7 0.7 8.4 Ø4.2 Ø2.2 8.4 Ø4.2 Ø2.2 8.4
3.7 3.7 18.4 22 18.4 3.7 22 18.4 22 Ø4.2 Ø2.2 58.8 58.8
3.7 3.7 12.5 3.7 12.5 12.5 58.8
6.8 6.8 6.8 4.4 12.4 4.4 12.4 4.4 12.4
4 4 4
5.6 5.6 5.6
3.7 3.7 11.3 3.7 11.3 17 11.3 17
3.7 3.7 17 23.2 3.7 23.2 23.2 23.2 23.2 23.2
0.7 0.7 0.7 16.5 16.5 10.7 10.7 10.7
2.1 2.1 2.1 16.5
3 3 3 20 20 20

158